Evaporator Expansion Valve Removal and Installation

1.	A/C Refrigerant - Recover

2.	A/C Lines - Disconnect

3.	Expansion Valve - Remove

Remove the expansion valve (A).

NOTE:

Screw the A/C pipe fixing both in the expansion valve about 4 to 6 heads. Hold the bolts and pull them out.

Be careful not to damage the expansion valve.

4.	All Removed Parts - Install

Install the parts in the reverse order of removal, and note these items:

New O-rings should be used at each fitting. Prior to installation, apply a thin coat of the same refrigerant oil used in the A/C compressor. Be sure to use the correct O-rings for refrigerant types to avoid leakage.