DTC Troubleshooting: B2A60-52
DTC B2A60-52: Dynamic Camera Aiming Incomplete
NOTE:
Before you troubleshoot, review the general troubleshooting information.
This DTC is stored when if multipurpose camera aiming has not been performed or has been performed but failed.

DTC Description
DTC
Freeze Frame
B2A60-52 Dynamic Camera Aiming Incomplete
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.

?3.
Turn the vehicle to the OFF (LOCK) mode.


?4.
Turn the vehicle to the ON mode, then wait for at least 5 seconds.

?5.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
B2A60-52 Dynamic Camera Aiming Incomplete
    

Is DTC B2A60-52 indicated?

     
YES
     
     
     
The failure is duplicated. Do the dynamic camera aiming.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?