DTC Troubleshooting: P0564-F0
DTC P0564-F0: ACC Switch Signal Circuit Error
NOTE:
Before you troubleshoot, review the general troubleshooting information.
If DTC P0564-11 or P0564-15 is stored at the same time as DTC P0564-F0, troubleshoot DTC P0564-11 or P0564-15 first, then recheck for DTC P0564-F0.

DTC Description
DTC
Freeze Frame
P0564-F0 ACC Switch Signal Circuit Error
    

1.
Gauge control module DTC check:

Gauge control module DTC check
?1.
Turn the vehicle to the ON mode.

?2.
Check for DTCs with the HDS.
DTC Description
DTC
   

Are any DTCs indicated?

     
YES
     
     
     
     
NO
     
     
     
Go to step 2.
2.
Problem verification:

Problem verification
?1.
Clear the DTC with the HDS.


?2.
Turn the vehicle to the OFF (LOCK) mode, then the ON mode.

?3.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
P0564-F0 ACC Switch Signal Circuit Error
    

Is DTC P0564-F0 indicated?

     
YES
     
     
     
The failure is duplicated. Check for loose terminals and poor connections in the multipurpose camera unit 20P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the multipurpose camera unit.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?