Dashboard Removal and Installation

SRS components are located in this area. Review the SRS component locations, 2-door, 4-door and the precautions and procedures before doing repairs or service.

1. Battery Terminal - Disconnect


2. Both A-Pillar Trims - Remove


3. Both Side Defogger Vent Trims - Remove


4. Gauge Control Module - Remove


5. Multi-Information Display Unit - Remove


6. GPS Antenna - Remove (With Navigation)


7. Sunlight Sensor - Remove


8. Dashboard Center Lower Cover - Remove


9. Steering Column - Remove


10. Front Passenger's Airbag Inflator Connector - Disconnect


11. Front Passenger's Airbag - Remove

If the front passenger's airbag has not deployed, remove the front passenger's airbag.

12. Dashboard - Remove

1.
From the center area, remove the harness clip (A).





2.
Remove the dashboard (A).


SRS components are located in this area. Review the SRS component locations, 2-door, 4-door and the precautions and procedures before doing repairs or service.

1. Dashboard - Install

1.
Install the dashboard (A).





2.
Install the harness clip to the center area (A).

2. Front Passenger's Airbag - Install

If the front passenger's airbag has not deployed, install the front passenger's airbag.

3. Front Passenger's Airbag Inflator Connector - Connect


4. Steering Column - Install


5. Dashboard Center Lower Cover - Install


6. Sunlight Sensor - Install


7. GPS Antenna - Install (With Navigation)


8. Multi-Information Display Unit - Install


9. Gauge Control Module - Install


10. Both Side Defogger Vent Trims - Install


11. Both A-Pillar Trims - Install


12. Battery Terminal - Connect