DTC Troubleshooting: U0420-68
DTC U0420-68: EPS Control Unit Malfunction
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
DTC
Freeze Frame
U0420-68 EPS Control Unit Malfunction
    

1.
EPS system DTCs check:

EPS system DTCs check
?1.
Turn the vehicle to the ON mode.

?2.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
     

Are any DTCs indicated?

     
YES
     
     
     
     
NO
     
     
     
Go to step 2.
2.
Problem verification:

Problem verification
?1.
Clear the DTC with the HDS.


?2.
Turn the vehicle to the OFF (LOCK) mode.

?3.
Turn the vehicle to the ON mode, then wait for at least 5 seconds.

?4.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
U0420-68 EPS Control Unit Malfunction
    

Is DTC U0420-68 indicated?

     
YES
     
     
     
Check for loose terminals and poor connections in the multipurpose camera unit 20P connector. If they are OK, replace the multipurpose camera unit.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.?