Engine Oil Pump Removal and Installation
Special Tools Required
Image Description/Tool Number
2279882.png Engine Support Hanger, A and Reds AAR-T1256*
310190.png Universal Lifting Eyelet 07AAK-SNAA120
*: Available through the Honda Tool and Equipment Program 888-424-6857.
6. Cam Chain Drive Sprocket - Remove
1.
Remove the key (A) and the cam chain drive sprocket (B).
NOTE: Check the direction of the key. When the key is installed, install the key as same direction of the original one.

7. Universal Lifting Eyelet - Install

8. Engine Support Hanger - Install

NOTE: Be careful when working around the windshield.
1.
Remove the front damper caps.
2.
Install the engine support hanger onto the vehicle as shown.
3.
Attach the hook (A) to the slotted hole in the universal lifting eyelet.
4.
Tighten the wing nut (B) by hand, and lift and support the engine.

10. Oil Pump - Remove
1.
Remove the oil strainer (A) and the oil pump (B).

1. Oil Pump - Install
1.
Install the oil pump (A).
2.
Install the oil strainer (B) with a new O-ring (C).

3. Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.

4. Engine Support Hanger and Universal Lifting Eyelet - Remove


5. Cam Chain Drive Sprocket - Install
1.
Install the cam chain drive sprocket (A) and the key (B).