Clutch Slave Cylinder Removal and Installation

NOTE:
Use fender covers to avoid damaging painted surfaces.
Do not spill brake fluid on the vehicle; it may damage the paint or plastic. If brake fluid gets on the paint or plastic, wash it off immediately with water.
Plug the ends of the slave cylinder and flare nut to prevent spilling brake fluid.


1

7057_3.0_enu_14577988_3.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
enu_255688_1.0
Super high temp urea grease (P/N 08798-9002)
*1
0.4?1.0 g (0.014?0.035 oz)

4. Slave Cylinder - Remove


5. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

6. Clutch Hydraulic System - Bleed
2.
Check the clutch operation and check for leaking fluid.

7. Test Drive - Check