Alternator Removal and Installation
NOTE:
Where icon is shown, click for further information.
1
Detailed information, notes, and precautions
Torque: N·m (kgf·m, lbf·ft)
1.
12 Volt Battery Terminal - Disconnect
2.
Engine Undercover - Remove
NOTE: Remove the necessary part(s).
3.
Drive Belt - Remove
4.
Exhaust Pipe A - Remove
5.
Torque Rod - Remove
6.
Positive Alternator Cable - Disconnect
7.
Alternator - Remove
NOTE: Remove the alternator from the opening between the front subframe and the intermediate shaft.
Note for installation
Be sure to use bolt
which is applied only to this engine type.
When installing the alternator, do the following procedures.
-1.
Loosen the bolt
.
-2.
Loosely tighten the all bolts to finger-tight.
-3.
Tighten the bolts in sequence, to the specified torque.
8.
Alternator Bracket - Remove (if necessary)
9.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
which is applied only to this engine type.
.