Transmission Mount Removal and Installation

NOTE:


1

8269_3.0_enu_15126058_2.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)


2

8269_3.0_enu_15102518_2.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)


3

8269_3.0_enu_15102519_2.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)
enu_12714524_1.0
Replace

5. 12 Volt Battery Base - Remove

Note for installation

Tighten the mounting bolts in the numbered sequence shown.
When installing the 12 volt battery base, tighten the mounting bolts in the following numbered sequence.
???
If disassemble the 12 volt battery base during removal, tighten the mounting bolts in the following numbered sequence.
???????

6. Harness Bracket - Move


7. Transmission - Support
1.
Lift and support the transmission with a jack and a wood block under the transmission.

8. Ground Cable - Remove


9. Transmission Mount - Remove
NOTE: Do not remove the bolt (A) from the transmission mount. If the bolt is removed, the transmission mount must be replaced as an assembly.


10. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.