Thermostat Housing Removal and Installation (K20C1)

Thermostat Housing Removal and Installation

	Torque: N·m (kgf·m, lbf·ft)
	Replace

1.	Engine Coolant - Drain

2.	Air Cleaner - Remove

3.	12 Volt Battery Base - Remove

4.	Charge Air Cooler Pipe - Remove

NOTE: Remove the necessary part(s).

Note for installation

Make sure to review the hose band precautions before installing the charge air cooler pipe(s).

5.	Vacuum Pump Holder - Remove

6.	ECT Sensor 1 - Remove

7.	Thermostat - Remove

8.	Heater Hose - Disconnect

9.	Thermostat Housing - Remove

10.	Connecting Pipe - Remove (If necessary)

11.	All Removed Parts - Install

Install the parts in the reverse order of removal.