DTC Troubleshooting: C1650-62, C1652-62, C1653-62
DTC C1650-62 : Left-Front Acceleration Sensor Difference Abnormality DTC C1652-62 : Left-Rear Acceleration Sensor Difference Abnormality DTC C1653-62 : Right-Rear Acceleration Sensor Difference Abnormality
DTC Description
DTC
Freeze Frame
C1650-62 Left-Front Acceleration Sensor Difference Abnormality
C1652-62 Left-Rear Acceleration Sensor Difference Abnormality
C1653-62 Right-Rear Acceleration Sensor Difference Abnormality
DTC (Adaptive Damper System)
1.
Problem verification:
Problem verification
?1.
Turn the vehicle to the ON mode.
?2.
Clear the DTC with the HDS.
Clear DTCs
?3.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
?4.
Test-drive the vehicle at 16 mph (25 km/h) or more for at least 60 seconds.
NOTE: Drive the vehicle on the road, not on a lift.
?5.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
C1650-62 Left-Front Acceleration Sensor Difference Abnormality
C1652-62 Left-Rear Acceleration Sensor Difference Abnormality
C1653-62 Right-Rear Acceleration Sensor Difference Abnormality
Is DTC C1650-62, C1652-62, or C1653-62 indicated?
The failure is duplicated. Go to step 2.
Intermittent failure, the system is OK at this time.
Refer to intermittent failures troubleshooting . If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?
2.
Acceleration sensor check:
Acceleration sensor check
?2.
Turn the vehicle to the ON mode.
?3.
Clear the DTC with the HDS.
Clear DTCs
?4.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
?5.
Test-drive the vehicle at 16 mph (25 km/h) or more for at least 60 seconds.
NOTE: Drive the vehicle on the road, not on a lift.
?6.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
C1650-62 Left-Front Acceleration Sensor Difference Abnormality
C1652-62 Left-Rear Acceleration Sensor Difference Abnormality
C1653-62 Right-Rear Acceleration Sensor Difference Abnormality
Is DTC C1650-62, C1652-62, or C1653-62 indicated?
Check for loose terminals and poor connections in the adaptive damper control unit 24P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK,
replace the adaptive damper control unit .?