Apply a light coat of new engine oil to the lip of the transmission end crankshaft oil seal (A).
3.
Using the driver handle, 15 x 135L and the oil seal driver attachment, 92 mm, to drive a new crankshaft oil seal squarely into the engine block to the specified installed height.
4.
Measure the distance between the engine block (A) and the crankshaft oil seal (B).
Transmission End Crankshaft Oil Seal Installed Height
0.75?1.25 mm (0.0295?0.0492 in)
6.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
