B2A70-14 LDW/RDM Switch Signal Circuit Short to Power
1.
Problem verification:
Problem verification
?1.
Turn the vehicle to the ON mode.
?2.
Clear the DTC with the HDS.
?3.
Turn the vehicle to the OFF (LOCK) mode, then the ON mode.
?4.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
B2A70-14 LDW/RDM Switch Signal Circuit Short to Power
Is DTC B2A70-14 indicated?
YES
The failure is duplicated. Go to step 2.
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?
Repair a short to power in the LDW OFF SW wire between the RDM switch and the multipurpose camera unit.?
NO
Check for loose terminals and poor connections in the multipurpose camera unit 20P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the multipurpose camera unit.?