This DTC is stored when the installed the millimeter wave radar or the multipurpose camera unit is not suitable for the vehicle. The multipurpose camera unit detects a failure when the functional code received from the millimeter wave radar stays in an error state.
DTC Description
DTC
Freeze Frame
P2583-4A Millimeter Wave Radar Function Error
1.
Problem verification:
Problem verification
?1.
Turn the vehicle to the ON mode.
?2.
Clear the DTC with the HDS.
?3.
Turn the vehicle to the OFF (LOCK) mode, then the ON mode.
?4.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
P2583-4A Millimeter Wave Radar Function Error
Is DTC P2583-4A indicated?
YES
The failure is duplicated. The multipurpose camera unit information does not match the functional code received from the millimeter wave radar. Replace the millimeter wave radar or the multipurpose camera unit with the one suitable the vehicle.?
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.?
