Check the transmission fluid (HCF-2) level.

Check the drive pulley, the driven pulley, the pulley shafts, the steel belt, and pulley related parts for wear and damage. If there are worn or damaged, replace the transmission housing assembly.

Check the transmission fluid feed pipe for wear, damage, and out of round.

Inspect the input shaft assembly for wear and damage. If the input shaft is worn or damaged, replace it and also check the related part of the input shaft assembly for wear and damage.

Check the secondary drive gear, the secondary driven gear, and the final driven gear for wear and damage.

Check the final driven gear for wear and damage.

Check the sun gear for wear and damage. If the sun gear is worn or damaged, replace it and also check the planetary carrier pinion gears, the forward clutch, and the drive pulley shaft splines for wear and damage.

Check the control shaft assembly for wear and damage.

Check the control lever for wear and damage.

Check the park pawl and the pawl shaft for wear and damage. If the park pawl or the pawl shaft are worn or damaged, replace them and also check the park gear for wear and damage.

Check the manual valve lever and the lever pin for wear and damage.

Check the transmission fluid pump assembly for wear and damage. If the transmission fluid pump assembly is worn or damaged, replace it as an assembly.

Check the transmission fluid pump drive chain and the transmission fluid pump drive/driven sprocket for wear and damage.

Check the transmission fluid strainer and the transmission fluid filter for debris. If the transmission fluid strainer or the transmission fluid filter is clogged, find the damaged components that caused debris.

Check the valve body assembly for wear and damage.

Inspect the transmission range switch.

Inspect the torque converter assembly for wear and damage.

Check the stator shaft for wear and damage.