Door Lock Actuator Test
Front Door

1. Front Door Panel - Remove

Remove the front door panel.

2. Front Door Lock Actuator - Test

Driver's Door

Front Passenger's Door
1.
Disconnect the front door latch connector.
2.
Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.
3.
If the actuator does not operate as specified, the front door lock actuator is faulty; replace the front door latch (A).
4.
Connect the front door latch connector.

3. Front Door Panel - Install

Install the front door panel.

Rear Door

1. Rear Door Panel - Remove

Remove the rear door panel.

2. Rear Door Lock Actuator - Test


Left and Right Rear Door
1.
Disconnect the rear door latch connector.
2.
Check the actuator operation by connecting power and ground according to the table.
NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.
3.
If the actuator does not operate as specified, the rear door lock actuator is faulty; replace the rear door latch (A).
4.
Connect the rear door latch connector.

3. Rear Door Panel - Install

Install the rear door panel.